Diagnostic Analyser
 |
 PC Motherboard Diagnostic Analyser Test Probe Card Post  US $9.61
|
 Motherboard Diagnostic PC Analyser Test Probe Card Post US $6.62
|
 PC Analyser Test Probe Card Post Motherboard Diagnostic US $6.24
|
What does this diagnostic code mean?
Check engine light in our 1999 Chev Suburban will come on and our diagnostic analyzer indicates the code po440. Any ideas on how to take care of this?
Technical Description
Evaporative Emission Control
System Malfunction
What does that mean?
This indicates that a part of the EVAP control system is no longer fuctioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister, purge valve, and other hoses. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve
opens allowing intake vacuum to siphon the fuel vapors into the engine.
Causes
A code P0440 could mean one or more of the following has happened:
* The gas cap is not installed or working properly
* The purge solenoid has failed
* The canister is plugged and not working properly
Possible Solutions
With a P0440 OBD-II trouble code
, diagnosis can be tricky at times. Here are some things to try:
* Remove and reinstall the gas cap, clear the code, and drive for a day and see if the codes come back.
* Inspect the EVAP system for cuts/holes in tubes/hoses
* Inspect for damaged or disconnected hoses around the Evap purge solenoid
* Check and/or replace the sensor
* Check and/or replace the purge valve
* Have a professional use a smoke machine to detect leaks
Immunoassay analyser 'Evidence Evolution' by Randox unveiled at AACC, Anaheim 2010 (part 1)
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.